DIODES CR2, CR3
Open front panel.
Remove and tag leads from right heatsink:
W16 from CR3;
W15 from CR2
Remove right heatsink:
Remove nuts, washers, spacers, and choke lead from 7/16" bolt at top of heatsink.
R e m o v e two nuts, washers, spacers at bottom of heatsink.
U s e care in removing diodes. Observe polarity when
removing and replacing diodes.
Tighten mounting nut
Replace two machine screws at bottom.
Replace nuts, washers, spacers, and choke lead
on 7/16" bolt at top of heatsink.
W16 to CR3;
W15 to CR2.