TM 11-6130-243-12-1
APPENDIX C
MAINTENANCE ALLOCATION
INTRODUCTION
Section 1.
C-1. General
This appendix provides a summary of the
maintenance operations covered in the equip-
ment literature for Power Supply PP-4606A/
d. Tools and Equipment. The numbers ap-
pearing in this column refer to specific tools
G. It authorizes categories of maitenance for
and equipment which are identified by these
specific maintenance functions on repairable
numbers in section III.
items and components and the tools and equip-
e. Remarks. Self-explanatory.
ment required to perform each function. This
appendix may be used as an aid in planning
maintenance operations.
C-3. Explanation of Format for Tool and
Test Equipment Requirements
C-2. Explanation of Format for Maintenance
The columns in the tool and test equipment
Allocation Chart
requirements chart are as follows:
a. Group Number. Not used.
a. Tools and Equipment. The numbers in
b. Component Assembly Nomenclature. This
this column coincide with the numbers used
column lists the item names of component units,
in the tools and equipment column of the
assemblies, subassemblies, and modules on
MAC. The numbers indicate the applicable tool
which maintenance is authorized.
for the maintenance function.
c. Maintenance Function. This column indi-
b. Maintenance Category. The codes in this
cates the maintenance category which per-
column indicate the maintenance category
formance of the specific maintenance function
normally allocated the facility.
is authorized. Authorization to perform a
c. Nomenclature. This column lists tools,
function at any category also includes authori-
test, and maintenance equipment required to
zation to perform that function at higher cate-
perform the maintenance functions.
gories. The codes used represent the various
maintenance categories as follows:
d. Federal Stock Number. This column lists
the Federal stock number.
e. Tool Number. Not used.
23