TM 5-1730-245-14
5.5 HYDRAULIC FLUID TANK - REPLACE.
THIS TASK CONSISTS OF: a. Removal
b.
Installation
INITIAL SETUP
Tools:
Equipment Condition:
Toolkit, General Mechanics (item 5, Section II, Appendix B).
Shop Equipment, Automotive Maintenance and Repair:
Hydraulic fluid drained. Refer to 4.3.
Organizational Maintenance, Common No. 1, less
Battery disconnected. Refer to 4.19
Fuel tank removed. Refer to 4.17.
Cabinet top cover removed. Refer to 4.16.
General Safety Requirements:
WARNING
Material/Parts Required:
Hydraulic fluids are toxic and flammable.
Do not use near heat or open flame.
Area should be well ventilated. DO NOT SMOKE.
1) Tag and remove the wires (2) from oil overtemp switch (3).
2) Remove and plug hose (4) from hydraulic fluid tank (11).
3) Remove hydraulic fluid tank drain valve (10).
CAUTION
Ensure hydraulic fluid filter and housing are not damaged when removing hydraulic
fluid tank from unit.
4) Remove the hydraulic fluid tank assembly from rear of the cabinet.
1) Install the hydraulic fluid tank (11) through the rear of the cabinet, making sure the bottom mounting
angle (7) is to the front.
3) Connect the fluid lines (1) at the return filter housing (16) on the hydraulic fluid tank (11).
4) Connect the hose (4) to the hydraulic fluid tank (11).
5) Connect the wires (2) to the oil overtemp switch (3).
5-6