TM 5-1730-245-14
12) Remove screws (50), lockwashers (51), screw (52), lockwasher (53) gasket (41) and muffler (49).
13) Remove locknuts (19) special washers (17), steel straps (16), flatwashers (10), bolts (9) and
shockmounts (18). Retain special washers (17) for future use Discard locknuts and shockmounts
14) Connect slinging hooks (1) to the two slinging points (2) on the engine and, using a hoist, lift the
engine clear from the base. The engine in this condition will weigh approximately 400 lbs
Figure 6-3. Engine Block Assembly.
6-5