TM 5-1730-245-14
1) Connect slinging hooks (1) to the two slinging points (2) on engine and using a hoist lift engine on to
base.
2) Install the shockmounts (18), steel straps (16), special washers (17), washers (10), bolts (9) and nuts
(19).
3) Install gasket (41), muffler (49), lockwashers (51), screws (50), lockwasher (53) and screw (52).
4) Install upper (7) and lower (54) radiator hoses Tighten clamps (4)
5) Install glow plugs (3) wires (8), lockwashers (6) and nuts (5).
6) Install pump (20) flatwashers (23), lockwashers (22) and screws (21).
7) Install fuel inlet (25) and fuel leakoff hoses (26)
9) Install bushing (35), nipple (36), tee (37), oil pressure switch (38) and wires (39, 40)
10) Install oil pressure sending unit (34), wire (33), lockwasher (32) and nut (31).
11) Install the engine temperature sending unit (44), wire (45), flatwasher (46), lockwasher (47) and nut
(48).
12) Install engine high temperature switch (42) and wires (40,43)
13) Install air cleaner duct (12) and tighten clamp (11).
14) Install three battery ground cables (13), lockwasher (14) and screw (15)
6-6