Control Relays K1 and K2 Connections
(5) Tag and remove wire from ter-
minals S-l, S-2, POS, and NEG.
(6) Tag and remove slide in wire
from 28V keyswitch input terminal (28).
(3) Open electrical trays access
It is necessary to push wires and
cables toward front of AGPU to al-
low space for motor controller to
be removed. Do not pick up motor
(26) and flat washers (27) from termi-
controller by small component
nals S-1, S-2, POS, and NEG.
parts or breakage may occur.