TM
55-1730-229-34
AG
320A0-MME-000
TO
35C2-3-473-2
TM
1730-34/1
Table 1-1.
Tabulated Data (continued)
Running Gear (continued)
11.
Turning radius approximately 11 feet (3.4m)
Parking brake on rear wheels
Ground clearance 7 inches (18 cm) under axles
12.
Propulsion.
28 vdc, 3 hp drive motor, 83-14501-01 (FSCM 63631) with electric brake,
304198-32 (FSCM 4Y298)
Variable speed O to 3 mph on level terrain
1/2 mph on 15 degree slope
Manual clutch
Twist-grip speed/direction control, spring loaded to off
Dead-man control
Table 1-2.
Item
Paragraph
Hydraulic hose (AN-6) coupling nuts
210 to 230 inch-pounds
Hydraulic hose (AN-12) coupling nuts
900 to 1,000 inch-pounds
Hydraulic hose (AN-20) coupling nuts
1,520 to 1,680 inch-pounds
280 to 300 inch-pounds
Starter housing to end bell bolts
25 to 30 inch-pounds
Hydraulic pump mounting nuts
180 to 200 inch-pounds
Hydraulic tube fittings
135 to 150 inch-pounds
Hydraulic reservoir coupling nut
900 to 1,000 inch-pounds
Hydraulic tube fittings
450 to 500 inch-pounds
1-16
Change 3