TM
55-1730-229-34
AG
320A0-MME-000
TO
35C2-3-473-2
TM
1730-34/1
Table 2-2.
Direct/General Support Troubleshooting (continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
FLUID TEMPERATURE HIGH (continued)
28.
Fins of cooler are fragile and easily bent. Use care when
cleaning to prevent damage.
Reassemble module according to the procedure of paragraph
d.
8-18 steps as. through av.
Step 2.
Eliminate problem (which is caused by either internal contamination
in cooler or having coolers internal check valve stuck in open
a. Disassemble module to gain access to cooler. Use procedures
b.
c.
step x.).
d.
starting with step y.
UNABLE TO DRAIN OR FILL AGPU FROM DUAL MANIFOLD.
29.
Check dual manifold FILL/DRAIN valve:
a.
dual manifold hole where valve fits.
b.
Inspect valve cartridge for signs of blockage (i.e., lodged
bits of packing).
Replace valve packing.
c.
d.
operation.
2-16