TM 55-1730-229-34
AG 320A0-MMME-000
TO 35 C2-3-473-2
TM 1730-34/1
Figure 9-24.
Hot Section Inspection Points
Section IV.
SCHEDULED 1500 HOUR DETAILED HOT SECTION INSPECTION
9-17. DETAILED HOT SECTION INSPECTION
(a) Check vane surfaces (1) for
(ENGINE REMOVED).
No damage
nicks, dents, or cracks.
allowed.
The following procedure is performed
with the engine removed from AGPU, and
(b) Check body (2) for dents or
cracks. No damage allowed.
installed on maintenance stand.
(c) If damage is evident or sus-
a. Disassembly, Inspection, and Re-
pected remove engine from service
pair.
(3) Inspect turbine rotor, figure
(1) Perform procedures in para-
(a) Visually inspect each tur-
bine rotor blade for cracks in trailing
edge. No cracks allowed.
9-45