TO 35 C2-3-473-2
c. Traction Motor/Gear Drive.
face and transfers power via a 3/4 inch
The traction motor pro-
diameter keyed output shaft. Motor con-
vides propulsion power to maneuver the
trol is accomplished by voltage changes
that are determined by the motor con-
AGPU. The motor will drive the AGPU in
troller. The motor controller responds
forward and reverse at a speed of 3
to operator manipulation of the speed/
miles per hour on flat ground and at 1/2
mile per hour on a 15 degree slope. The
direction controls. The motor is pro-
tected from overheating by a thermal
motor is a high torque, 28 vdc unit that
operates at a maximum speed of 5,000
switch which disconnects the input power
to the motor.
rpm. The motor mounts to the electric
brake assembly by a standard NEMA "C"