NOTES:
AU PLUG AND JACK TERMINALs SHOWN
ARE TERMINALS OF PLUG PI AND JACK J2.
JACK J I NOT USED IN THIS CIRCUIT.
ON POWER SUPPLY PP-1209/FG,
ORDER NO. 42902-PHILA-57, TERMINAL
BOARD TB2 IS NOT USED.
ON POWER SUPPLY PP-1209B/FG,
TERMINAL 80ARD TB2 HAS ONLY ONE
TERMINAL; THE GROUND SIDE OF THE
AC INPUT CABLE IS SOLDERED TO
THIS TERMINAL. THE LIVE SIDE OF THE
AC INPUT CABLE IS SOLDERED TO ONE
TERMINAL OF THE FUSE HOLDER FOR
AC INPUT FUSE F2.
ON POWER SUPPLY PP-12098/FG
RESISTOR R2 IS 10 OHMS.
ON POWER SUPPLY PP-1209B/FG,PLUG
- IN UNITS THAT HAVE BEEN MODIFIED
IN ACCORDANCE WITH MWOII-S605-239
- 35/1 HAVE 27,000-OHM RESISTOR
R4 CONNECTED IN PARALLEL WITH
CAPACITOR Cl BETWEEN CONTACTS
3 AND 4 OF PLUG PI.
NOTES:
ALL PLUG AND JACK TERMINALS SHOWN
ARE TERMINALS OF PLUG PI AND JACK JI
JACK J2 NOT USED IN THIS CIRCUIT.
ON POWER SUPPLY PP-1209/FG
ORDER NO. 42902-PHILA-57, TERMINAL
BOARD TB2 IS NOT USED.
ON POWER SUPPLY PP-1209B/FG,
TERMINAL BOARD TB2 HAS ONLY ONE
TERMINAL; THE GROUND SIDE OF THE
AC INPUT CABLE IS SOLDERED TO
THIS TERMINAL. THE LIVE SIDE OF THE
AC INPUT CABLE IS SOLDERED TO ONE
TERMINAL OF THE FUSE HOLDER FOR
AC INPUT FUSE F2.
ON POWER SUPPLY PP-1209B/FG,
RESISTOR R2 IS 10 OHMS.
ON POWER SUPPLY PP-1209B/FG, PLUG
-IN UNITS THAT HAVE BEEN MODIFIED
IN ACCORDANCE WITH MWOII-58-9
-35/I HAVE 27,000-OHM RESISTOR R4
CONNECTED IN PARALLEL WITH
CAPACITOR Cl BETWEEN CONTACTS 3
AND 4 OF PLUG PI
TM
5805-239-35-I
Figure 21. Power Supply PP -1209(*)/FG, schematic diagram (all models except
Order No. 10473-PP-61XM9).
