TM
11-6130-266-24P-2
d. Part Number. Indicates the primary number
authorized to remove, replace, and use the support
used by the manufacturer (individual, company,
item. The maintenance code entered in the third posi-
firm, corporation, or Government activity), which
tion will indicate one of the following levels of
controls the design and characteristics of the item by
maintenance:
means of its engineering drawings, specifications,
standards, and inspection requirements to identify an
Application/Explanation
Code
item or range of items.
O
--Support item is removed, replaced, used at
NOTE
the organizational level.
When a stock numbered item is req-
F
-- Support item is removed, replaced, used at the
uisitioned, the repair part received may
direct support level.
have a different part number than the part
being replaced.
H
Support item is removed, replaced, used at the
general support level.
e. Federal Supply Code for Manufacturer (FSCM).
The FSCM is a 5-digit numeric code listed in SB
(b) The maintenance code entered in the
70842 which is used to identify the manufacturer,
fourth position indicates whether the item is to be
distributor, or Government agency, etc.
repaired and identifies the lowest maintenance level
with the capability to perform complete repair (i.e.,
f. Description. Indicates the Federal item name
all authorized maintenance functions). This position
and, if required, a minimum description to identify
will contain one of the following maintenance codes:
the item. In the Special Tools List, the initial basis of
issue (BOI) appears as the last line in the entry for
Application/Explanation
Code
each special tool, special TMDE, and other special
support equipment. When density of equipments sup-
F
--The lowest maintenance level capable of com-
ported exceeds density spread indicated in the basis
plete repair of the support item is the
of issue, the total authorization is increased accord-
direct support level.
ingly.
H
--The lowest maintenance level capable of com-
plete repair of the support item is the
g. Unit of Measure (U/M). Indicates the standard
general support level.
of the basic quantity of the listed item as used in per-
--Nonreparable. No repair is authorized.
forming the actual maintenance function. This
Z
measure is expressed by a two-character alphabetical
(3) Recoverability code. Recoverability codes are
abbreviation (e.g., ea, in, pr, etc). When the unit of
measure differs from the unit of issue, the lowest unit
assigned to support items to indicate the disposition
action on unserviceable items. The recoverability code
of issue that will satisfy the required units of
is entered in the fifth position of the Uniform SMR
measure will be requisitioned.
Code format as follows:
h. Quantity Incorporated in Unit. Indicates the
quantity of the item used in the breakout shown on
Recoverability
the illustration figure, which is prepared for a func-
Definition
codes
tional group, subfunctional group, or an assembly.
Z
--Nonreparable item. When unserviceable, con-
demn and dispose at the level indicated in
4. Special Information
position 3.
a. The following publication pertains to the
F
-- Reparable item. When uneconomically repar-
PP6224/U and its components:
able, condemn and dispose at the direct
TM 11613026615, Power Supply PP6224/U
support level.
b. National stock numbers (NSN's) that are miss-
H
--Reparable item. When uneconomically repar-
ing from P source coded items have been applied for
able, condemn and dispose at the general
and will be added to this TM by future change/revi-
support level.
sion when they are entered in the Army Master Data
File (AMDF). Until the NSN's are established and
c. National Stock Number. Indicates the National
published, submit exception requisitions to: Com-
stock number assigned to the item and will be used
mander, US Army Communications and Electronics
for requisitioning purposes.
2
