TM 3-4240-302-30&P-5
2-7. POWER DISTRIBUTION UNIT (CONT).
LOCATION
ITEM
ACTION
REMOVAL
Panel
FAN circuit breaker CB1
1.
Remove six screws (1), washers (2), and wires
(3) from FAN circuit breaker CB1 (4). Tag wires.
2.
Unsolder and tag wires from C and NO
contacts (5) on FAN circuit breaker CB1 (4).
3.
Remove four screws (6), and remove FAN
circuit breaker CB1 (4) from panel (7).
NOTE
Observe orientation of numbers on push
button.
INSTALLATION
1.
Insert FAN circuit breaker CB1 (4) in panel (7),
and secure with four screws (6).
2.
Solder wires to C and NO contacts of circuit
breaker. Refer to wiring diagram (p. 2-39).
3.
Install wires (3) on six electrical terminals using
six screws (1) and washers (2). Refer to wiring
diagram (p. 2-39).
2-28
