TM 5-1730-245-14
SECTION II. EQUIPMENT DESCRIPTION
1.10 EQUIPMENT CHARACTERISTICS, CAPABILITIES AND FEATURES.
1 10.1 The power unit is a skid mounted diesel engine driven hydraulic power supply.
1 10.2 The unit provides two independent circuits of 8 GPM hydraulic fluid at 2000 PSI Either circuit may be
unloaded independently of the other when not required
1.10.3 The two circuits can be manifolded to form one 16 GPM circuit at 2000 PSI by means of panel mounted
valves
1.10 4 The power supply is completely self contained and has its own hydraulic oil and diesel fuel reservoirs,
engine and hydraulic oil radiators as well as all necessary hydraulic components and regulators.
1.10.5 Standard flush face quick disconnects are provided on the unit inlet and outlet ports.
1.11 1 Figure 1-2 indicates the location of
the following major components found on
the power supply:
1
HYDRAULIC OIL FILLER CAP Provides access to fill the hydraulic reservoir.
2
ENGINE EXHAUST. Vents engine exhaust.
3
ENGINE RADIATOR ACCESS CAP. Provides access to radiator.
4
HYDRAULIC CONNECTIONS
Inside front cover
5
REMOVABLE FRONT PANEL.
This panel closes up the front of unit for outside storage or shipment.
6
SLAVE RECEPTACLE. Connects to battery, may be used to charge battery or to connect external 24 volt
accessory.
7
QUICK DISCONNECT FASTENER. Quarter turn fasteners used to fasten the panels.
8
REMOVABLE SIDE PANELS.
These panels close up the sides of the unit for outside storage or
shipment.
9
BATTERY. Source of 24 volt DC.
10
HYDRAULIC FLUID RESERVOIR. Stores hydraulic fluid.
11
FUEL TANK. Stores fuel.
12
FUEL FILLER ACCESS CAP. Provides access to fill the fuel tank.
13
HYDRAULIC FLUID RESERVOIR DIPSTICK. Measures level of hydraulic fluid
1-3