TM
55-1730-229-12
AG
320A0-OMM-000
TO
35C2-3-473-1
TM
1730-12/1
Table 1-1.
Tabulated Data (continued)
Engine (continued)
2.
Dry Weight:
130 pounds (59 kilograms)
Dimensions:
Height:
24.8 inches (63 centimeters)
Length:
32.8 inches (83.3 centimeters)
Width:
20.8 inches (52.8 centimeters)
Shaft Horsepower (sea level):
With bleed air:
46 shp minimum
Without bleed air: 62 shp minimum
Engine Speeds:
Nominal full-load governed speed: 58,737 rpm (100 percent)
Full-load governed speed limits:
58,167 to 59,034 rpm (99 to 100.5 percent)
Gearcase output drive pads (clockwise rotation):
Generator drive pad:
8,000 rpm
8,000 rpm
Hydraulic pump drive pad:
Electrical system voltage:
28 vdc nominal
Lubrication system:
Oil
MIL-L-23699 or MIL-L-7808
Capacity
2.3 U.S. quarts (2.2 liters)
Filter
Replaceable element
Starter motor:
Voltage
28 vdc nominal
Current
Approximately 800 ampere initial start to approximately
200 ampere at 60% GTE rotor speed
1-18
