APPENDIX C
MAINTENANCE ALLOCATION
Section I. INTRODUCTION
d. Tools and Equipment. The numbers ap-
C-1. General
pearing in this column refer to specific tools
This appendix provides a summary of the
and equipment which are identied by these
maintenance operations covered in the equip-
numbers in section III.
for
Power
supply
literature
ment
PP-4763/GRC and PP-4763A/GRC. It autho-
e. Remarks. Self explainatory.
rizes categories of maintenance for specific
maintenance functions on repairable items and
C-3. Explanation of Format for Tool and
components and the tools and equipment re-
Test Equipment Requirements
quired to perform each function. This appendix
The columns in the tool and test equipment re-
may be used as an aid in planning maintenance
quirements chart are as follows:
operations.
a. Tools and Equipment. The numbers in
C-2. Explanation of Format for Mainten-
this column coincide with the numbers used in
ance Allocation Chart
the tools and equipment column of the MAC.
a. Group Number. Not used.
The numbers indicate the applicable tool for
b. Component Assembly Nomenclature. This
the maintenance function.
column lists the item names of component
b. Maintenance Category. The codes in this
units, assemblies, subassemblies, and modules
column indicate the maintenance category nor-
on which maintenance is authorized.
mally allocated the facility.
c. Maintenance Function. This column indi-
c. Nomenclature. This column lists tools,
cates the maintenance category at which per-
test and maintenance equipment required to
formance of the specific maintenance function
perform the maintenance functions
i s authorized. Authorization to perform a
function at higher categories. The codes used
d. Federal Stock Number. This column lists
represent the various maintenance categories
the Federal stock number.
as follows:
e. Tool Number. Not used
Operator/Crew
C
O
O r g a n i z a t i o n a l Maintenance
F
Direct Support Maintanance
H
General Support Maintenance
D
Depot Maintenance
C-1
