TM
11-5820-921-40-1
TABLE 3-6. POWER AMPLIFIER AM-6545GRC-193 ASSEMBLY AND/OR
COMPONENT INSPECTION PROCEDURES (Continued)
INSPECT FOR
MODULE, PCB/PWB, OR COMPONENT
Loose, damaged, or missing assembly mounting
Indicator Assembly 1A14A4
hardware; overheated, cracked, or missing pc board
components; cracked, lifted, or cut pc board runs;
cold solder joints; loose, frayed, cracked, broken,
abraded, or missing wires.
Loose, damaged, or missing assembly mounting
Junction Block PWB Assembly 1A14A5
hardware; cracked, lifted, or cut pcb runs; loose,
frayed, cracked, broken, abraded, or missing wires;
cold soldered joints.
Loose, damaged, or missing assembly mounting
Regulator Assembly 1A14A6
hardware; bent, twisted, or warped bracket; loose,
P/N 755017A4031
frayed, cracked, broken, abraded, or missing wires;
cold soldered joints.
Loose, damaged, or missing assembly mounting
Harmonic Filter Assembly 1A15
hardware; overheated, cracked, broken, or missing
components; twisted, broken, or shorted inductors;
loose, frayed, cracked, broken abraded, or missing
wires; cold soldered joints; bent, twisted, broken,
or missing coaxial cables and connectors.
Loose, damaged, or missing assembly mounting
Component Bracket Assembly
hardware; cracked, broken, or overheated capacitors
(for L1, K1, and C1)
(C1 and C2); cracked, broken, or overheated induc-
P / N 755017A4064
tor assembly (L1); broken or damaged K1 relay
assembly; burned relay contacts; loose, frayed,
broken, abraded, or missing wires; cold soldered
joints.
3-21
