TM 11-5820-921-40-2
TECHNICAL CHARACTERISTICS
Six digital inputs from receiver/transmitter
FREQUENCY CONTROL
DIMENSIONS:
(TUNING)
8.0 inches (20.3 cm)
HEIGHT
16.4 inches (41.7 cm)
LENGTH
11.4 inches (28.9 cm)
WIDTH
WARMUP TIME
60 seconds 10 seconds
54 lbs. (24.5 kg)
WEIGHT
Convection and forced air (fan on case exterior)
COOLING
2.0 to 29.9999 MHz in 0.1 kHz increments
FREQUENCY RANGE
High frequency power amplifier
TYPE OF AMPLIFIER
-40C (-40F) to +55C (+13 1F)
OPERATING TEMPERATURE
400 watt PEP or average
RF POWER OUTPUT
Up to 10,000 ft
OPERATIONAL ALTITUDE
Less than 100 milliwatts for rated output. (2 watts PEP maximum)
RF INPUT
IMMERSION OPERATION
3 feet in both fresh and salt water for 4 hours
Automatic - less than 6 seconds
TUNING
20 g's, 11 msec
SHOCK
Continuous transmit at 400 watts average power output
DUTY CYCLE
2.5 g's or 1.5 inch double amplitude, 5-55 Hz
VIBRATION
50 ohms with VSWR <1.3:1
INPUT AND OUTPUT
+22 to +30 Vdc, +26.5 Vdc (nominal, 45 amps maximum)
PRIMARY POWER
REQUIREMENTS
USB, LSB, CW, SSB secure voice, SSB FSK
OPERATIONAL MODES
SPURIOUS SUPPRESSION :
Third order intermodulation products suppressed more than
INTERMODULATION
30 dB below either of two equal tones producing 400 watts
PRODUCTS
PEP 1 dB
35 dB below rated output
60 dB below rated output
SPURIOUS RADIATION
40 dB below rated output
HUM AND NOISE
iv
