TM 11-5820-921-40-2
NOTES
Lubrication of the Gears and Coil contact surfaces
is required only during overhaul of the respective
units and should not be performed at any other
time.
PROCEDURES
A. GEAR LUBRICATION
Apply a small amount of Lubriplate
grease, RF SPECIFICATION NO.
755017A8241 to the Lubrication
points specified in the illustration
to the left.
Remove any excess grease using a
lint-free cloth dampened with MEK
(Methylethylkeytone) MIL-M-81351.
B. COIL CONTACT SURFACE LUBRICATION
Mix one part Lubriplate grease, RF
SPECIFICATION NO. 755017A8241
and eight parts of Methylethylkeytone
(MEK) MIL-M-81351 in a suitable
container.
Using an appropriate device, spray the
mixture on all coil contact surfaces.
Remove any excess lubricant, using
a lint-free cloth dampened with
Methylethylkeytone (MEK) MIL-M-
81351.
TANK CIRCUIT MODULE ASSEMBLY 1A8
Figure 2. Lubrication Instructions
