TM 3-4240-302-30&P-5
APPENDIX B
REPAIR PARTS AND SPECIAL TOOLS LIST
Section I INTRODUCTION
B-1. SCOPE. This RPSTL lists and authorizes spares
b. SMR CODE [Column (2)].
The Source,
and repair parts, special tools, special test,
Maintenance, and Recoverability (SMR) code is a 5-
measurement, and diagnostic equipment (TMDE), and
position
code
containing
supply/requisitioning
other special support equipment required for
information, maintenance category authorization criteria,
performance of direct support maintenance of the power
and disposition instruction, as shown in the following
distribution unit. It authorizes the requisitioning, issue,
breakout:
and disposition of spares, repair parts, and special tools
as indicated by the source, maintenance, and
Source
recoverability (SMR) codes.
Code
1st
this Repair Parts and Special Tools List is divided into
XX
two positions
the following sections:
How you get an item
a. Section II. Repair Parts List. A list of spares
Maintenance
and repair parts authorized by this RPSTL for use in the
Code
performance of maintenance. The list also includes
parts which must be removed for replacement of the
XX
authorized parts. Parts lists are composed of functional
groups in ascending alphanumeric sequence with the
3rd position
4th position
parts in each group listed in ascending figure and item
number sequence. Bulk materials are listed by item
Who can install,
Who can do complete
name in FIG BULK at the end of the section.
replace, or use the item
repair* on the item
b. Section III. Special Tools List. Not applicable.
Recoverability
c. Section IV. National Stock Number and Part
Code
Number Index. A list, in National item identification
number (NIIN) sequence, of all National stock numbered
items appearing in the listing, followed by a list in
X
alphanumeric sequence of all part numbers appearing in
the listing. National stock numbers and part numbers
Who determined
are cross-referenced to each illustration figure and item
disposition action on an
number appearance.
unserviceable item
B-3. EXPLANATION OF COLUMNS (SECTION II).
*Complete Repair: Maintenance capacity, capability,
a. ITEM NO. [Column (1)]. Indicates the number
and authority to perform all the corrective maintenance
used to identify items called out in the illustration.
tasks of the "Repair" function in a use/user environment
in order to restore serviceability to a failed item.
B-1
