TM 5-1730-245-14
4.18 AIR FILTER - REPLACE.
THIS TASK CONSISTS OF:
a. Removal
b. Installation
INITIAL SETUP
Tools:
Equipment Condition:
Toolkit, General Mechanics (item 5, Section III, Appendix B).
Front panel (5, fig. 1-2) removed.
Material/Parts Required:
Air filter, item 9, Appendix I.
a. Removal. Refer to figure 4-8.
1) Loosen clamp (2) by turning screw counter clockwise.
2) Remove old filter (3) from intake nipple (1) and discard in accordance with local SOP
3) Retain clamp (2).
b. Installation. Refer to figure 4-8.
1) Install a new filter (3) to intake nipple (1) Tighten clamp (2) by turning screw clockwise
Figure 4-8. Air Filter.
4-23
