Maintenance Code.

SECTION I. INTRODUCTION

Illustration

Special Tools List For Load Bank 0-30Kw, Ac, Portable, Skid Mounted Page Navigation
2

5-6115-423-25P

Code

Explanation

of the applicable end item, and the

Applied to high dollar value recoverable

failure of which should result in re-

repair parts which are subject to special

tirement of the end item from the supply

handling and are issued on an exchange

system.

baais. Such repair parts normally are

Applied to repair parts which are not pro-

repaired or overhauled at depot main-

cured or stocked, the requirement for

tenance activities.

which will be supplied by use of the

Applied to repair parts specifically selected

next higher assembly or components.

for salvage by reclamation units because

Applied to repair parts which are not

of precious metal content, critical ma-

stocked.

The indicated maintenance

terials, high dollar value reusable cas-

category requiring such repair parts will

ings or castings.

attempt to obtain them through canni-

(4) This column also lists, below the SMR

balization; if not obtainable through.

code, an index number for each item

cannibalization, such repair parts wiIl

be requisitioned with supporting justi-

in ascending numerical sequence,

fication through normal supply channels.

which is used to locate items in the

Applied to repair parts authorized for local

publication when the Federal stock

procurements. If not obtainable from local

number and/or reference number is

procurement, such repair parts will be

known.

requisitioned through normal supply chan-

nela with a supporting statement of non-

b. Federal Stock Number. Indicates the

availability from local procurement

Federal stock number for the item.

Applied to major assemblies that are pro-

c. Description. Indicates the Federal item

cured with PEMA (Procurement Equip-

ment Missile Army) funds for initial

name and any additional description of the

issue only to be used as exchange assem-

item required. A part number or other refer-

blies at DSU and GSU maintenance

ence number is followed by the applicable five-

level. These assemblies will not be

digit Federal supply code for manufacturers in

stocked above DSU and GSU level or

parentheses.

returned to depot supply level.

d. Unit of Issue. Indicates the unit used as a

Note. Source code and level of main-

basis for issue, e.g., ea, pr, ft, yd, etc.

tenance are not shown on common

hardware items known to be readily

e. Quantity Incorporated in Unit Pack. In-

available in Army supply channels and

dicates the actual quantity contained in the

through local procurement.

unit pack.

Maintenance Code. Indicates the low-

(2)

f. Quantity Incorporated in Unit. Indicates

est category of maintenance author-

the quantity of the item used in the functional

ized to install the listed item. The

group.

maintenance level codes are:

g. Fifteen-Day Organizational Maintenance

Code

Explanation

Allowances.

Organizational maintenance

(1) The allowance columns are divided

Direct support maintenance

into four subcolumns. Indicated in

General support maintenance

each subcolumn opposite the f irst ap-

Depot maintenance

pearance of each item is the total

Recoverability Code. Indicates whether

(3)

quantity of items authorized for the

unserviceable items should be re-

number of equipments supported.

turned for recovery or salvage. Items

Subsequent appearances of the same

not coded are expendable. Recovera-

item will have no entry in the allow-

bility codes are:

ance columns but will have in the

Code

description column a reference to the

Explanation

first appearance of the item. Items

Applied to repair parts and assemblies

which are economically repairable at

authorized for use as required but not

DSU and GSU activities and normally

for initial stockage are identified with

are furnished by supply on an exchange

an asterisk in the allowance column.

basis.

Privacy Statement
Press Release
Contact