Section Il. OPERATION OF AUXILIARY EQUIPMENT

ARMY TM 5-6115-633-14&P

(2) Dual generator set operation. Use the switch box to alternately operate both generator sets

as follows:

(a) Make sure power and ground cables are connected to switch box and both generator

sets.

(b) Select first generator set to be used and bring it into operation in accordance with

paragraph 2-1, b (1), steps (b) through (d).

(c) Turn second generator set on and bring it up to rated speed, voltage and frequency.

(Refer to TM 5-6115-585-12.) Close circuit breaker (move to ON position).

(d) Move switch box rotary switch to GEN position corresponding to second generator set.

(e) Open circuit breaker on first generator set (move to OFF position) and turn generator set

off. (Refer to TM 5-6115-585-12.)

(f) To stop operation, move rotary switch to OFF position and open circuit breaker on

generator set still running. Turn generator set off. (Refer to TM 5-6115-585-12.)

c. Trailer Operating Procedures. Refer to TM 9-2330-213-14&P for specific operating

procedures for the M103A3 trailer.

Section Il. OPERATION OF AUXILIARY EQUIPMENT

2-2. Operation of Auxiliary Equipment. There is no auxiliary equipment supplied with the power plant.

Section Ill. OPERATION UNDER UNUSUAL CONDITIONS

2-3. Operation Under Unusual Conditions. When operating the power plant under unusual conditions

such as extremes in temperature or difficult terrain, there are steps that must be taken to protect the

equipment.

a. Refer to TM 5-6115-585-12 for special procedures when operating the generator sets under

unusual conditions.

b. Refer to TM 9-2330-213-14&P for special procedures when operating the trailer under unusual

conditions.

2-2

Privacy Statement
Press Release
Contact