ARMY TM 5-6115-633-14&P
Table 4-1. Unit Preventive Maintenance Checks and Services (PMCS). CONT.
H Hours of operation
W -- Weekly
Item to be
a. Inspect brake linings for wear. Replace
if brake shoe lining is less than 1/8-
inch (3.2 mm) thick.
b. Inspect brake adjusting screw, retaining
screw, retaining pins, springs,
and clips for corrosion and wear.
c. Inspect hydraulic wheel cylinders for
d. Inspect master cylinder for leaks or low
fluid level. Fill to within 1/2 inch
e, Adjust brakes (page 4-52,
Clean and repack (page 4-105,
Inspect for dents, cracks, loose
Tubes and Hoses
connections and leaks.
Perform road test paying special attention
to items that were repaired or adjusted.
Section VI. TROUBLESHOOTING
4-13. Troubleshooting. Troubleshooting procedures for components unique to the power plant end
item are given in paragraph 4-14. Troubleshooting information for the individual generator sets and trailer
are contained in their respective technical manuals referenced below.
a. Generator Set Troubleshooting. Refer
to TM 5-6115-585-12 for troubleshooting procedures
b. Trailer Troubleshooting. Refer to TM 9-2330-213-14&P for troubleshooting procedures
applicable to the trailer.