TM 55-1730-229-12
AG 320A0-OMM-00
TO 35C2-3-473-1
TM 1730-12/1
Control Panel, Controls and Indicators (continued)
Table 2-1.
Control or
Function
Indicator
Description
GTE Section
10 AMP push-pull
10 circuit
Protects against overloads in engine dc
circuits.
breaker (CB2)
ENGINE CONTROL
START position (momentary) - Applies
Three-position
(STOP/RUN/START)
battery voltage to GTE start relay.
switch (S1)
Battery voltage is available when MASTER
rotary switch. Switch
SWITCH and GTE 10 circuit breaker are on.
is spring-loaded to
return to RUN position
RUN position - Holds start relay energized,
when released from
which maintains voltage to ECU.
START position.
STOP position - Deenergizes GTE start
STARTER ON
Illuminates when GTE starter contactor is
Green indicator light
energized.
indicator (DS2)
EGT oFX100
0 to 18 oFX100
Indicates GTE exhaust gas temperature (EGT)
in OF.
(0 to 1800OF) scale
meter (M1)
Green band below
1275oF, yellow band
at 1275-1295oF,
and red band above
1295OF.
Illuminates if GTE is shut down because of
Red warning indicator
HIGH EGT
high EGT.
light
indicator (DS3)
Indicates GTE speed as percentage of
0 to 120% linear
% RPM meter
governed speed.
scale. Green band at
(M2)
95-105%, yellow band
at 105-108%, and red
band above 108%.
OVER SPEED
Illuminates if GTE shuts down because of
Red warning indicator
overspeed.
light
indicator (DS4)
Indicates fuel level.
E(empty) to F(ful1)
FUEL gauge (M3)
scale with l/8-tank
divisions.
F(ful1) = 65 gallons.
2-3
