TM
55-1730-229-12
AG
320A0-OMM-000
TO
35C2-3-473-1
TM
1730-12/1
Table 2-1.
Control Panel, Controls and Indicators (continued)
Control or
Description
Indicator
Function
GTE Section (continued)
LOW FUEL
Amber caution
Illuminates when 15 to 30 minutes of fuel
indicator light
indicator (DS5)
remains.
LOW FUEL' PRESS
Illuminates if GTE shuts down because of
Red warning Indicator
low fuel pressure. (No output from
indicator (DS6)
light
auxiliary fuel pump.)
INLET FILTER
Amber caution
Illuminates if GTE inlet air flow is
(AIR CLEANER)
indicator light
restricted, causing bypass door to open.
BLOCKED
indicator (DS8)
HI OIL TEMP
Red warning indicator
Illuminates if GTE shuts down because of
indicator (DS9) light
high oil temperature.
LOW OIL PRESS
Red warning indicator
Illuminates if GTE shuts down because of
low oil pressure. (Oil pressure must be
indicator
light
low for 10 seconds after GTE rpm reaches
(DS10)
95% before GTE is shut down.)
COMPT/GEN HI
Amber caution
Illuminates if electrical bay temperature
TEMP indicator
indicator light
high.
(DS11)
CONTROL SHORT
Red warning indicator
Illuminates if GTE shuts down because of
indicator
light
overcurrent condition in ECU circuits.
(DS12)
(Overcurrent condition must exist for 3
seconds before ECU shuts down GTE.)
BATTERY 24 VDC Section
BATTERY VOLTAGE
0 to 40 volt, with
Indicates battery voltage when MASTER
2 volt divisions.
SWITCH is on.
meter (M4)
Green band at 24-32
volts.
STARTER CURRENT 0 to 12 AMPS x 100
Indicates GTE starter current when starter
(0-1200 AMPS) scale.
meter (M5)
is energized. (The starter can be run from
the AGPU battery or from an external source
connected to the AGPU slave receptacle.)
2-4