TM 55-1730-229-12
AG 320A0-OMM-000
TO 35C2-3-473-1
TM 1730-12/1
Malfunction
Page
GTE EGT METER READS IN RED BAND AND ENGINE CONTINUES TO RUN
36.
ABOVE 95% RPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GTE %RPM METER READS IN RED BAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
37.
GTE INLET FILTER BLOCKED INDICATOR LIT ..............................
38.
GTE COMPT/GEN HI TEMP INDICATOR LIT (AC POWER SWITCH OFF)..............
39.
ENGINE DOES NOT SHUT DOWN WHEN EMERG STOP SWITCH IS PRESSED............
40.
ENGINE IS NOISY ON SHUTDOWN ............................................
41.
DC POWER ON INDICATOR OFF (ENGINE UP TO SPEED AND DC POWER
42.
SWITCH ON) ............................................................
DC VOLTAGE FAULT INDICATOR LIT .....................................
43.
DC VOLTS METER READS 0 (DC POWER ON INDICATOR LIT).....................
44.
DC AMPS METER READS 0 (DC POWER ON INDICATOR LIT AND DC
45.
POWER CABLE CONNECTED TO LOAD) .........................................
DC OVER CURRENT INDICATOR DOES NOT LIGHT WHEN DC AMPS METER
46.
READS MORE THAN 1070 AMPS ..............................................
DC VOLTAGE FAULT INDICATOR DOES NOT LIGHT FOLLOWING A DC
47.
OVER CURRENT FAULT ................................................
DC VOLTAGE FAULT INDICATOR DOES NOT LIGHT WHEN DC AMPS
48.
METER READING EXCEEDS MAXIMUM ALLOWABLE FOR THE CURRENT
SELECTOR SWITCH SETTING ................................................
DC VOLTAGE FAULT INDICATOR DOES NOT LIGHT WHEN DC VOLTS
49.
METER READS LESS THAN +20 VOLTS OR MORE THAN +32 VOLTS .................
AC POWER ON INDICATOR OFF (ENGINE UP TO SPEED AND AC POWER
50.
SWITCH ON) ..........................................................
AC OVER VOLTAGE, OR AC UNDER FREQUENCY INDICATOR LIT...................
51.
AC UNDER VOLTAGE INDICATOR LIT ........................................
52.
AC VOLTS METER READS 0 (AC POWER ON INDICATOR LIT).....................
53.
AC HERTZ METER READS 0 (AC VOLTS METER READS NORMAL)...................
54.
AC %LOAD METER READS 0 (AC POWER ON INDICATOR LIT AND AC
55.
POWER CABLE CONNECTED TO LOAD) ....................................
4-19
