TM 55-1730-229-12
TO 35C2-3-473-1
Organizational Preventive Maintenance Checks and Services (continued)
Table 4-1.
Organizational
Work Time
Inspection Procedures
M/H
W
M
H
S
2
1.0
WHEEL BEARINGS
Refer to paragraph 4-112 for inspection procedure. Repack in
accordance with L.O.
3
0.2
BRAKE CABLE ASSEMBLY
Inspect brake cable assembly in accordance with paragraph 4-115.
Lubricate in accordance with L.O.
REAR AXLE
4
0.4
Check differential lubrication level, and add if required in accordance
with L.O. Drain and refill in accordance with paragraph 4-8.b and
L.O.
5
0.3
GEAR DRIVE ASSEMBLY
Check lubrication level and add if required in accordance with L.O.
Drain and refill in accordance with paragraph 4-8.b and L.O.
6
0.3
CHAIN DRIVE ASSEMBLY
Check lubrication level and add if required in accordance with L.O.
Drain and refill in accordance with paragraph 4-8.b and L.O.
1
0.2
Lubricate in accordance with L.O. every 250 hours.
2
0.3
ENGINE FUEL FILTERS
Inspect and replace auxiliary and FCE fuel filters every 250
operating hours in accordance with paragraphs 4-66 and 4-69.
3
0.2
IGNITER PLUG
Remove, inspect, and reinstall every 100 operating hours in
accordance with paragraph 4-81.
