TM 55-1730-229-12
AG 320A0-OMM-000
TO 35C2-3-473-1
TM 1730-12/1
12-4-28
PANEL LAMP VOLTAGE REGULATOR 3VR1
1.
NUT
7.
2.
LOCKWASHER
UTILITY LAMP VOLTAGE REGULATOR 3VR2
8.
INSULATOR
3.
WIRE TERMINAL LUG
9.
4.
WASHER
PIN (CATHODE)
10.
LOWER ELECTRICAL TRAY
5.
SHOULDER WASHER
11.
6.
SCREW
SILICONE RUBBER SEALANT
12.
Figure 4-28. Voltage Regulator
NOTE
(4) Remove two nuts (1), lock-
washers (2), wire terminal lug (3),
Items (1) through (6) and (9) are
washers (4), and shoulder washers (5)
provided in a mounting kit.
Remove screws
from underside of tray.
(6), regulator (7), and insulator (9)
from top of tray.
(1) Set replacement regulator (7)
in place on top of tray with insulator
c. Install. (See figure 4-28.)
(9) between regulator and tray.
The regulator case and mounting
hardware must be insulated from
tray. Make sure the insulator and
shoulder washers are properly in-
stalled.
4-193
