TM
55-1730-229-34
AG
320A0-M4E-000
TO
35C2-3-473-2
TM
1730-34/1
Electrical Trays and Battery
b.
(c) Replace hinges (2) by drill-
(See figures
ing out twelve rivets (1), and instal-
Compartment Access Doors.
l i n g new hinge. Rivet new hinge.
3 - 5 and 3-6.)
NOTE
(1) Remove. Drill out four rivets
(1) and remove door.
I f replacement hinge is not avail-
a b l e , one can be fabricated from
(2)
Repair.
M S 3 5 8 2 5 - 3 E hinge stock. Cut to
l e n g t h , and match drill rivet
(a) Repair doors by straighten-
holes.
ing and painting.
( d ) Replace detent latch (9, 10)
(b) Replace latch (5) by drill-
by drilling out two rivets (7), and in-
ing out four rivets (4), and installing
stalling new latch.
n e w latch. Rivet new latch .
Match drill holes
for latch (9) to align with holes on
latch (10) if required.
Rivet new
(c) Replace hinge (2) by drill-
latch.
ing out four rivets (1) and installing
new hinge. Rivet new hinge.
Replace weld p i n s ( 4 ) ,
(e)
acoustic insulation (5), and self-
NOTE
locking washers (6) as described in
p a r a g r a p h 3-2.f.
I f replacement hinge is not avail-
a b l e , one can be fabricated from
Position door and
(3) Install.
s e c u r e with rivets.
M S 3 5 8 2 5 - 3 E hinge stock. Cut to
l e n g t h , and match drill rivet
holes.
H y d r a u l i c Module Front Panel As-
sembly. (See figure 3-8.)
Position door and
(3) Install.
s e c u r e with rivets.
( 1 ) R e m o v e . Remove ten screws (1)
and washers (2) and remove panel assem-
(See
fig-
bly.
c. Engine Access Door.
ure 3-7.)
(2)
Repair.
Drill out
twelve
(1) Remove.
r i v e t s (1) and remove door.
(a) Repair front panel (10) and
d o o r s (7, 9) by straightening and paint-
ing.
(2) Repair.
(b) Replace latches (8) by
(a) Repair door panel (3), hose
drilling out four rivets (3), and in-
hanger (12), and tray (13) by straight-
s t a l l i n g new latch. Rivet new latch.
e n i n g , welding, and painting.
(b) Replace latches (8) by
(c) Replace hinges (4) by drill-
i n g out seven rivets (3), and installing
drilling out four rivets (7), and in-
new hinge. Rivet new hinge.
s t a l l i n g new latch. Rivet new latch.
3-8
