TM
55-1730-229-34
AG
320A0-MME-000
TO
35C2-3-473-2
TM
1730-34/1
Electrical Assemblies Inspection/Check Procedures
Table 9-1.
Item
Requirements
Inspect/Check
Nomenclature
No.
Visually check outer shield-
No chafing on outer shield-
Igniter Plug
3
ing allowed.
Lead
ing for chafing.
No cracks or separation
Visually check for cracks or
between shielding and
separation between shielding
terminal end allowed.
and terminal end.
Visually check connector
No cracks or damaged
threads allowed.
nuts for cracks and damaged
threads.
No cracks or chips allowed.
Visually check ceramic
4
Igniter Plug
insulator of igniter plug
for cracks and chips.
Visually check electrode for
No distortion allowed.
Electrode shall not be less
distortion and erosion.
than 0.010 inch above
ceramic insulator.
No bent, broken or burned
Visually check connector for
pins allowed.
bent, broken and burned pins.
No damage to threads
Visually check igniter plug
threads for damage.
allowed.
No cracks allowed.
Visually check igniter plug
housing for cracks.
No dents or cracks allowed.
Visually check case of
Ignition Unit
7
ignition unit for dents and
cracks.
9-8
