TM
9-6115-652-14&P
NOTE
Two center mounting screws on each side can be reached through cutouts in trailer frame
under each fender. The beveled washers (5) may have been welded in place.
Figure 5-3. Detaching Generator Set from Trailer.
(2)
Remove eight screws (4), eight beveled washers (5), eight flat washers (6) and eight nuts (7) securing
generator set (2) to trailer.
When lifting generator set, use lifting equipment with a minimum lifting capacity of 4000
lb. Do not stand under generator while it is being lifted. Do not permit generator set to
swing. Failure to observe these precautions can cause injury to personnel or damage to
equipment.
Attach lifting equipment with a minimum lifting capacity of 4000 lb (1, figure 5-4) to both lifting eyes (2)
(3)
on top edges of generator set (3). Insert a rope (4) through each of four tiedown rings (5) on generator
set.
(4)
With one person at each rope to steady and guide generator set (3), lift generator set off of trailer.
5-3
