TM 11-5820-765-34
RESISTOR R11
REMOVE
Open
front
panel.
Remove
two
outside
screws,
nuts,
washers.
Unsolder
resistor
lead.
Remove nut, washer, wire wrap, nut,
washers from terminal.
Cut wire wrap around resistor.
Remove resistor.
REPLACE
Put resistor in place.
Install new wire wrap around resistor.
Replace nut, washer, wire wrap,
nut, washer.
Solder resistor lead.
CAPACITORS C3 (PP-4763)
REMOVE
Open front panel.
Remove resistor R11 (follow steps above).
Unsolder
leads.
Remove capacitor.
REPLACE
Put new capacitor in place.
Solder leads.
Replace resistor R11 (follow steps above).
2-31
