TM 11-5820-765-34
6. DC VOLTAGE ADJUST COMPONENTS
RESISTOR R4
REMOVE
Open front panel.
Remove two outside screws, nuts, washers.
Unsolder leads, and tag.
Remove locknut, mounting nut, washer.
Remove resistor.
REPLACE
Put new resistor in place.
Replace screw, nut, washer.
Solder leads.
Replace two outside screws, nuts, washers.
RESISTOR R8
REMOVE
Open front panel.
Remove two outside screws, nuts, washers.
Unsolder leads and tag.
Remove locknut, mounting nut, washer.
Remove resistor.
REPLACE
Put new resistor in place.
Replace screw, nut, washer.
Solder leads.
Replace two outside screws, nuts, washers.
