TM 11-5820-765-34
13. AC CABLE W3
REMOVE
Remove top panel (para 2-10).
Remove rear panel.
Remove cable connector:
Remove machine screws.
Remove connector clamps.
Remove nuts, washers.
Disconnect three cable connections.
Remove
cable.
REPLACE
Install new cable.
Replace cable connections.
Replace nuts, washers.
Replace cable connector clamps.
Replace machine screws.
Replace rear panel.
Replace top panel.
REPLACE
REMOVE
Install new cable plug.
Connect leads inside plug.
Remove screws.
Remove cable plug clamp.
Replace cover insulator.
Remove
cover
insulator.
Replace cable plug clamp.
Disconnect leads inside.
Replace
screws.
Remove cable plug.
NOTE
Make
sure
connections
are
correct.
