INSTALLATION
2 - 1 . Installation Procedure
a . Connect the AC input p1ug to the 95-
Power Supply PP2309A/U is mounted on
t o 130-volt, single-phase, 60-cycle-per-seeond
a standard I9-inch relay rack. Select a location
source.
that is convenient to the power input source
b. Connect the dc load leads tp the respective
and for connection of the load to the power - and + DC OUTPUT jacks on the front
supply.
p a n e l or to terminals 1 and 4 on terminal
board TB1 on the rear of the chassis.
