TM 5-1730-245-14
4) Install the fuel tube (6) and finger tighten the fuel tube nuts (8 and 14).
5) Fit new seal, special (2) into the recess on the cylinder cover (4).
6) Install the fuel tube clamp (5) Install cylinder head cover nut (1) and torque to 6.5 ft.lb./9.0 Nm.
7) Torque the injector clamp bolt (10) to 15.5 ft lb /21.0 Nm.
8) Tighten the fuel tube nuts (8 and 14.)
9) Install the injector leak-off hose (13).
Figure 5-12. Fuel Injector.
5-21/(5-22 blank)
