TM 55-1730-229-12
AG 320A0-OMM-000
TO 35C2-3-473-1
TM 1730-12/1
OPERATOR/CREW MAINTENANCE INSTRUCTIONS
Section V.
This section contains
operator/crew maintenance and servicing
instructions referenced by table 3-2 or
Remove all rings, watches and other
3-3. Operator/crew maintenance is lim-
jewelry when performing maintenance
ited to servicing battery, hydraulic
on battery. Wear protective gear,
module reservoir, and engine gearcase
including goggles.
(see L.O.). Call organizational mainte-
nance for any other maintenance require-
a. Disconnect battery cable terminal
ments on the AGPU.
adapter (1, figure 3-2) from battery
terminal block (7) by turning knob (15)
counterclockwise.
SERVICING.
b. Remove wing nuts (2) and washers
(3) from tie-down rods (4), and remove
Do not attempt to service NiCad
battery cover (6). Disconnect vent tubes
battery. Never add water or elec-
(8) and remove battery.
trolyte.
3-18.1/(3-18.2 blank)
Change 2
