TM
55-1730-229-12
AG
320A0-OMM-000
TO
35C2-3-473-1
TM
1730-12/1
Table 4-2.
Organizational Troubleshooting (continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
81.
(continued)
k.
Shut down engine and disconnect battery.
1.
Disconnect test wire from charger connector J2.
m. Compare the indications observed or measured in steps h
through j above with indications listed in the following
chart, and do the indicated test or inspection procedure.
Battery Charger Indications
Test
CHGR/BAT
Charger
or
Charger
FAULT lamp
50 Amp Output
20 Amp Output
Inspection
(step 1 .h)
(step 1.i)
Step
(step 1.j)
ON
Voltage in limits for all
2
Voltage in limits
settings of charger output
control
OFF
Voltage in limits for all
NA
3
settings of charger output
control
NA
No output, or voltage out
4
No output, or
of limits for one or more
voltage out of
settings of charger output
limits
control
NA
No output
Voltage present
5
NA
6
Voltage present
No output
NA
Voltage present
Voltage present
Replace
but not in limits
battery
charger
NA
Voltage present
Voltage present but out of
7
limits for one or more
settings of charger output
control
4-108
