TM 55-1730-229-12
AC 320A0-OMM-000
TO 35C2-3-473-1
TM 1730-12/1
SPEED/DIRECTION CONTROL ASSEMBLY.
lens (17), bulb (18), nut (19), and
washer (20) from speed/direction control
assembly (5).
(See figure 4-93.)
a.
Remove.
c. Assembly.
(1) Remove screws (1) and cover
(3) from speed/direction control assem-
(1) Position two micro switches
(13) on speed/direction control assembly
bly.
(5). Install screws (15) and nuts (14).
(2) Remove wiring harness by tag-
Connect wires.
ging and disconnecting wires from ter-
minal board (4).
(2) Position light assembly (16)
on speed/direction control assembly (5).
(3) Tag and cut black, white and
Install nut (19), washer (20), bulb (18)
and lens (17). Connect wires.
brown (KWN) wire at splice.
(4) Remove wiring harness from
(See figure 4-93.)
Install.
d.
speed/direction control assembly (5) by
pulling harness through hole on under
(1) Position the speed/direction
side of tow bar (6).
control assembly (5) on the tow bar (6)
(5) Remove speed/direction control
and secure with lockwashers (8) and nuts
(7).
assembly (5) by removing nuts (7), lock-
washers (8).
(2) Insert wiring harness through
b.
hole in bottom of tow bar (6) into
Disassembly. (See figure 4-93.)
speed/direction control assembly (5).
(1) Remove and tag wires. Remove
two micro switches (13) by removing two
(3) Connect wires on terminal
nuts (14), and screws (15) from speed/
board (4) and splice the KWN wire to
marked wire.
direction control assembly (5).
(2) Remove and tag wires.
Remove
(4) Install cover (3) and screws
light assembly (16) by removing light
(1) on speed/direction control assembly.
