TM 55-1730-229-12
TO 35C2-3-473-1
NOTE
turning the speed/direction handgrip assembly and then
releasing the handgrip momentarily and then reversing
The trim pots are very sensitive so make your
the handgrip assembly. The AGPU, if adjusted prop-
adjustments accordingly.
erly, will slow, stop, and reverse without violent move-
ment. Should the AGPU fail to slow, stop, and reverse
(j)
Brake: Turn the brake trim pot approxi-
smoothly, adjust the brake trip pot in the direction of the
mately to turn in the direction of the arrow. The op-
arrow until the unit brakes smoothly. If the movement
erator at the speed/direction handgrip assembly should
is violent (e.g. the wires squeal while trying to reverse),
attempt to engage the propulsion motor at this time. The
turn the brake trim pot in the opposite direction of the
AGPU should propel in a slow smooth manner. The
arrow.
operator should verify the AGPU will brake properly by
