TM 55-1730-229-34
AG 320A0-MME-000
TO 35C2-3-473-2
TM 1730-34/1
CHAPTER 5
MAINTENANCE OF ELECTRICAL POWER GENERATION AND CONTROL SYSTEM
Refer to TM 55-
shaft and internal splines on gearcase
DESCRIPTION.
5-1.
drive.
1730-229-12 for a description of the
e l e c t r i c a l power generation and control
system.
(3) Align generator and install on
e n g i n e gearcase generator pad (6).
GENERATOR ASSEMBLY.
5-2.
(4) Install eight washers (4) and
a. R e m o v e . (See figure 5-1.)
nuts (5).
(1) Support rear of generator (3).
( 5 ) Tighten nuts (5) to 280 to 300
i n - l b s of torque in opposing sequence.
(2)
Remove
eight
nuts
(5)
and
w a s h e r s (4).
( 3 ) Remove generator from engine
g e a r c a s e generator pad (6).
Install.
(See figure 5-1.)
b.
( 1 ) I n s t a l l new packing (1) on
generator shaft (2).
5-1
