TM 55-1730-229-34
AG 320A0-MME-000
TO 35C2-3-473-2
TM 1730-34/1
(8) Connect wires to bypass door
c.
Install.
switch (1).
(1) Ensure that
gasket
(18)
is
p r o p e r l y positioned.
Refer to TM 55-1730-229-12, paragraph
4-19.
(2) Place outer duct (16) in posi-
t i o n in frame.
I n s t a l l r o o f . Refer to TM 55-
(10)
1730-229-12, p a r a g r a p h 4 - 1 6 .
(3) Install three screws (12),
(15) to secure top outer duct (16) to
frame.
3 - 7 . ENG:
(4) Ensure that gaskets (10,11)
a r e properly positioned.
( 1 ) Remove
(5) Place inner duct (9) in posi-
t i o n in frame.
(2) Remove engine
mounts (3, 4) or
g e n e r a t o r support (5) by removing bolts
(6) Install twenty screws (7), and
( 1 ) and washers (2).
w a s h e r s ( 8 ) t o s e c u r e i n n e r d u c t ( 9 ) to
outer duct (16).
Install.
(See figure 3-12.)
b.
(7)
Install two screws (2), wash-
ers (3),
a t o r support (5) by installing bolts (1)
and nuts
(6) to secure each end of inner
a n d washers (2).
duct (9)
support.
3-17