TM 55-1730-229-34
AG 320A0-MME-000
TO 35 C2-3-473-2
TM 1730-34/1
9-13.
f. Install inlet screen (17) on up-
per duct and secure with screws (18),
washers (19), and nuts (20).
Torque
nuts (20) to 25 inch-pounds.
Install
cap (1) on lower duct (2).
Lookwire
g. Install wiring harness (21)
cap.
clamps (22) on upper duct (38) using
screws (23) and washers (24).
b. If lower duct has been disassem-
bled, assemble as follows.
Position
h. Install fuel line (25) and clamp
seal (3) and seal retainer (4) to lower
duct (2) and secure with rivets (5).
c. Position lower duct (2) and upper
and nut (29).
duct (38) to engine. Position bracket
i. Install hourmeter bracket (30)
(6) to upper duct (38) and secure to
and bracket (31) using bolts (32).
lower duct (2) with bolts (7) and
Torque bolts to 35 inch-pounds.
washers (8). Ensure that ducts are lo-
cated in slots on retainer and gearcase.
j. Install wiring harness (33) and
Torque bolts to 35 Inch-pounds.
clamp (34) on bracket (31) using screw
(35), washer (36), and nut (37).
d. Install brackets (9), washers
(10), and bolts (11). Torque bolts to
35 inch-pounds.
9-14. Deleted.
e. Install wiring harness (12) and
clamps (13) on brackets (9) using bolts
(14), washers (15), and nuts (16).
9-15. Deleted.
Change 1
9-38