TM 55-1730-229-34
AG 320A0-MME-000
TO 35 C2-3-473-2
TM 1730-34/1
(5) Install gasket (6) and thermo-
(4) Connect wiring harness connec-
couple (7) and secure using bolts (8).
tor P6 (5) to speed sensor (2) and lock-
Torque bolts to 35 inch-pounds.
wire.
(6) Connect wiring harness (9)
(5) Apply a light coat of anti-
terminals to thermocouple (7) and secure
seize compound (Liqui-moly, Grade NV) to
threads of bolts (6).
with nuts (10, 11).
(7) If removed, install identifi-
(6) Install fuel solenoid (8) onto
cation plate (12) and secure with screws
duct bracket and secure with washers (7)
and bolts (6). Torque bolts to 35 inch-
(13).
pounds.
b. Install
Items. (See
Accessory
(7) Connect wiring harness connec-
tor (9) to fuel solenoid (8).
(1) Determine shim (1) require-
(8) Connect fuel line (10) to fuel
ments for speed sensor (2) as follows:
solenoid (8).
(a) Using a micrometer, measure
(9) Install fuel line (11) with
and record dimension A, figure 9-23.
bracket (12), using screw (13) and
washer (14) to secure bracket (12) to
(b) Using a micrometer, measure
gearcase.
and record dimension B.
(10) Connect fuel line (11) to fuel
solenoid (8) and fuel control unit (15).
(c) Subtract dimension A from
dimension B and record the difference as
(11) Install hourmeter (16) and se-
dimension C.
cure with screws (17). Torque screws to
(d) Add 0.015 inch to dimension
35 inch-pounds.
C and record as dimension D.
(12) Install wiring harness (18)
(e) Dimension D is the required
lugs on hourmeter (16) using screws
shim thickness and has an allowable tol-
(19), lockwashers (20) and washers (21).
erance of 0.003 inch.
(13) Coat threads of bolts (22)
(f) peel laminations from shim
with high temperature compound (Fel Pro
C5-A).
(1, figure 9-22) to the required thick-
ness of step (e).
(14) Install ignition unit (23) and
(2) Install shim (1) and packing
wiring harness (24) clamps (25) on
plenum and secure with bolts (22).
(3) on speed sensor (2).
Torque bolts to 50 inch-pounds.
(3) Install speed sensor (2) with
assembled items into gearcase and secure
(15) Connect wiring harness connec-
with bolt (4). Torque bolt to 35 inch-
tor P7 (26) to ignition unit (23) and
pounds.
lockwire.
9-42
