TM
55-1730-229-34
AG
320A0-MME-000
TO
35C2-3-473-2
TM
1730-34/1
(7) Install jam nut (29) and bolt
(3) Inspect axle shaft for damage,
warping, cracks or spline damage.
(30) onto clutch lever (6) until bolt
(30) is flush with back side of clutch
Remove locking pin (28), place
(4) Install axle retainer plate
lever.
the clutch lever In the tow position by
(7) with concave side toward axle
spline.
pushing inward, install locking pin
(28). With tow bar about half way down,
adjust bolt (30) inward or clockwise un-
(5) Using arbor press, press bear-
ing (2) and retainers (9) onto axle (3).
til tow bar DO NOT TOW light goes out.
Remove locking pin (28), pull clutch
outward and install locking pin. With
(6) Lubricate bearing (2).
tow bar about half way down, check tow
bar DO NOT TOW light is on. Tighten jam
nut (29) and torque to 160-190 inch pounds.
10-7. REAR AXLE REPLACEMENT.
(1) Install seal (1) into housing
(4).
(1) Remove wheels and tires in
(2) Install gasket (8) onto axle
(3).
accordance with paragraph 4-112, TM 55-
1730-229-12.
(3) Install backing plate (10) and
Ensure
(2) Remove brake drum and brakes
bolts (5) onto housing (4).
backing plate stud (11) is on the top.
in accordanoe with paragraph 4-115,
TM 55-1730-229-12 .
(4) Install axle (3) with bearing
(2) and axle retaining plate (7) into
(3) Remove four look nuts (6) se-
housing (4).
curing axle retainer plate (7).
(4) Remove axle (3) from housing
(5) Slide axle retaining plate (7)
over bolts (5). Install lock nuts (6).
(4).
(5) Remove gasket (8) from axle
(6) Install brake shoes and brake
drum in accordance with paragraph 4-115,
(3).
TM 55-1730-229-12 .
(6) Remove seal (1) from housing
(7) Install wheels and tires in
(4).
accordance with paragraph 4-112, TM 55-
1730-229-12.
(7) Remove backing plate (10) and
bolts (5).
b. Bearing
10-8.
REAR AXLE ASSEMBLY.
(1) Using arbor press, press bear-
(l) Position AGPU on level sur-
ings (2) and bearing retainers (9) free
Place chocks against front
of axle (3).
wheels.
(2) Remove axle retainer plate (7)
from axle (3).
(2) Disconnect battery.
10-22 Change l