TM 55-1730-229-34
AG 320A0-MME-000
TO 35C2-3-473-2
TM 1730-34/1
Figure 10-13.
Rear Axle Replacement
nuts (10) and lockwashers (9). Cut two
(3) Support the weight of the AGPU
using a suitable hoist and sling attach-
hardwires at butt splices.
ed to rear lifting eyes. Do not raise
the hardwires to electric
(7) Cut
rear wheels clear of ground.
brake (12).
(4) Disconnect parking brake in
accordance with TM 55-1730-229-12, para-
graph 4-114.
The rear axle assembly is top
heavy and will rotate on wheel
(5) Remove clutch assembly engage/
bearings when removed. To prevent
disengage microswitch in accordance with
injury to personnel or damage to
equipment, ensure rear axle assem-
bly is fully supported during the
(6) Disconnect and tag four wires
the following procedures.
(11) from traction motor (8) by removing
10-23
Change 2
