TM
9-6115-652-14&P
(2) Lift accessory box (4) so that top of box contacts lip of trailer frame (5).
(3) Insert three screws (1) down through trailer frame (5) into accessory box (4).
(4) Install one nut (3) and one washer (2) on each screw (1) and tighten.
4-19. Fire
the power unit is carried in a bracket mounted on the front roadside step.
Figure 4-7. Fire Extinguisher Bracket Replacement.
a. R e m o v a l .
(1) Remove four screws (1, figure 4-7), four flat washers (2), and four nuts (3) securing bracket (4) to
step (5).
( 2 ) Remove bracket (4) from step (5).
Installation.
b.
Position fire extinguisher bracket (4) on step (5).
(1)
Insert four screws (1) down through bracket (4) and through step (5).
(2)
Install one flat washer (2) and one nut (3) on each screw (1). Tighten hardware to secure bracket (4).
(3)
4-15
