TM 55-1730-229-12
TO 35C2-3-473-1
3. Temporarily install control
panel before starting engine.
WARNING
Remove all rings, watches and
other jewelry when performing
maintenance on this equipment.
a. Lower Control Panel for
Maintenance. When required by speci-
fic maintenance procedure, proceed
as follows:
(1) Shut down engine and disconnect
battery.
(2) Open control panel access door
(1, Fig. 4-13).
(3) While holding control panel (4)
in place remove four screws (2) and
washers (3).
(4) Grasp control panel at top by
toggle switches and carefully pull
top by toggle switches and carefully
pull top of panel back. Lower panel
so that panel is supported by cable
(5).
Change 8
4-164.1/(4-164.2 blank)
