TM 55-1730-229-12
AC 320A0-OMM-000
TO 35C2-3-473-1
TM 1730-12/1
A. CONTROL PANEL IN
OPERATING POSITION
B. CONTROL PANEL IN
12-4-13
MAINTENANCE POSITION
SUPPORT CABLE
CONTROL PANEL ACCESS DOOR
1.
5.
6.
NUT
2.
SCREW
3.
7.
WASHER
WASHER
4.
CONTROL PANEL
8.
JAM NUT
b. Extend Lower Electrical Tray for
NOTE
Maintenance. When required by specific
maintenance procedure, extend lower tray
Some maintenance tasks may be
as follows:
easier with control panel flat on
access cover. If so, do step (5).
(1) Shut down engine and discon-
nect battery.
(5) Remove nut (6) and washer (7)
from support cable (5), and lower con-
trol panel onto access cover.
(2) Open electrical trays access
(6) When maintenance task is com-
door (1, figure 4-14).
pleted, attach support cable (5) to con-
trol panel with washer (7) and nut (6).
Place control panel into operating posi-
(3) Remove two quick release pins
tion, and secure with four washers (3)
(2).
and screws (2).
